Comet Marine Pumps
| Home |
| Specifications |
| Select a Pump |
| Maintenance |
| Parts |
| Intake Engineering |
Select a pump
Choose the material closest to that which you'd like to pump:
Choose one...
Oily water/waste /sludge
Bilge water
Sea water
Fuel & cylinder oil/sludge
Lubricating oil
Stern tube lubricants
Tank cleaning waste
Grease
Diesel oil
Methanol
Butane gas
Heavy slurry
Light slurry
Uncrushable solids
Crushable solids
Suspended fibres
Pulps
Paper stock
Cotton waste
Sewage (screened or not)
Effluent
Manure
Pig food
Poor or even non-lubricants
Abrasives, however harsh
Toothpaste
Resins
Paints
Adhesives
Liquorice
Wheat gluten
Molasses
Brewers mash
Fruit and diced vegetables
Potato peelings
Frozen fish
Fish meal
- or -
Choose a material specifcation:
Choose one...
0-150 degrees Engler, Good lubricant
0-150 degrees Engler, Crushable solids
40-170 degrees Engler, Reasonable lubricant
40-170 degrees Engler, Crushable solids
40-200 degrees Engler, Poor lubricant
40-200 degrees Engler, Mild Abrasive
40-200 degrees Engler, Crushable solids
40-200 degrees Engler, Uncrushable solids to 4mm
40-200 degrees Engler, Fibrous content
300-1500 degrees Engler, Poor lubricant
300-1500 degrees Engler, Mild Abrasive
300-1500 degrees Engler, Crushable solids
300-1500 degrees Engler, Uncrushable solids to 4mm
300-1500 degrees Engler, Fibrous content
400-1500 degrees Engler, Non lubricant
400-1500 degrees Engler, Harsh abrasive
400-1500 degrees Engler, Uncrushable solids from 5mm ss
400-1500 degrees Engler, Fibrous content
Choose the maximum quantity you want to pump (in cubic metres/hour):
You need Pump type:
Choose the material closest to that which you'd like to pump:
Comet Marine Pumps